Three original Rife Machines have been found. Find out how they really worked by reading:
The Rife Machine Report

Dr. Rife’s true frequencies are not based on supposition, but hard evidence, gathered from all the known Rife documents and the actual analyzing of three original Rife machines that have been found. After reading this page you will want to read "Dr. Rife and Philip Hoyland's 3.3 MHz sweep" page.

Below in the first chart are Dr. Rife's original primary frequencies that were used in his Rife Ray #3 and Rife Ray #4 Rife Machines. These are the primary frequencies he used to devitalize or render harmless the microorganisms he tested in his laboratory. If you want a higher resolution copy of this chart click here. When people hear about the famous 1934 clinic where 16 patients, some having cancer and some having tuberculosis, recovered, it was these primary frequencies that were used. You will notice that none of these frequencies are low audio frequencies. These frequencies range from 139,200 Hertz for Anthrax to 1,607,450 Hertz for the BX Cancer virus. Dr. Rife did not use low audio frequencies on these organisms to devitalize or render them harmless. Dr. Rife always used high RF (Radio frequencies) on these organisms. To see the original document from Dr. Rife's lab showing the original primary frequencies click here.

The reason there is a slight difference in the frequencies from the original 1935 document is Philip Hoyland, who was Dr. Rife's engineer, fine-tuned the frequencies in 1936 so that he would have the most accurate frequencies for use in the new Beam Ray Clinical instrument. This new instrument would be sold to doctors. This chart below contains the most accurate primary frequencies of Dr. Rife’s true M.O.R.s. The term M.O.R. stands for "Mortal Oscillatory Rate" or the frequency that will devitalize or render harmless the harmful microorganism.

In the second chart, shown below, are higher low audio frequencies that were used in an Original Beam Ray Clinical M.O.P.A (Master Oscillator Power Amplifier) replica instrument. People have mistakenly used these higher audio frequencies believing that they were Dr. Rife’s original primary frequencies. We will give a condensed version on how this mistake came about. The audio frequencies that were used in one of Dr. Rife's Beam Ray Clinical Rife machines came about because Dr. Rife's engineer, Philip Hoyland, used audio frequencies to create high frequency sidebands that would hit the correct primary frequency. It was that sideband frequency which would then devitalize or kill the harmful microorganism. To date we know that Philip Hoyland used two different carrier frequencies, 3.3 and 3.8 Megahertz, in his Beam Ray Clinical Instruments. In one of the Original 1938 Beam Ray Clinical instruments Philip Hoyland used a 3.3 Megahertz fixed RF harmonic carrier frequency and the different audio frequencies shown below in the chart. But neither the 3.3 Megahertz carrier frequency nor the audio frequencies will do anything by themselves. But when the 3.3 Megahertz harmonic carrier frequency and the audio frequencies are combined together they will produce many sideband frequencies. One of these sideband frequencies will line up with the true Rife primary M.O.R frequency and devitalize or render harmless the harmful microorganism.

Because this information is so IMPORTANT we need to re-emphasize this fact so that no one who reads this information misunderstands. If you just use the audio frequencies by themselves you will get nothing. If you just use the 3.3 Megahertz carrier without the audio frequencies you will get nothing. The audio frequencies used in this instrument must have the RF carrier frequency of 3.3 Megahertz or they are useless. It is the sideband frequencies that are produced by the combining of the audio frequencies and the 3.3 fixed carrier frequency that killed or devitalized the microorganisms. Because this interaction between the audio frequencies and the 3.3 megahertz carrier frequency was not understood is the reason the 1950’s Beam Ray Clinical instrument called the AZ-58 did not work to its full capability.

Philip Hoyland used these higher audio frequencies so that he could hide the true Rife frequencies. The reason he had to hide the true Rife frequencies is due to the fact that Dr. Rife could not patent his Rife Machine or his frequencies. Dr. Rife's machines were standard frequency generating equipment of his day. The technology of generating frequencies had been in public domain for many years and this kept Dr. Rife from patenting his machine. To learn the complete story of his instruments read “The Rife Machine Report" on this site. If you want to know the complete story about these higher audio frequencies then read Chapter 11 of "The Rife Machine Report". The frequencies that Dr. Rife found for the various microorganisms were also considered un-patentable because they naturally occur in nature. Because there was no patent protection Philip Hoyland found a way to hide the true Rife frequencies using audio frequencies to create the proper high RF frequencies, using sidebands. It was one of these sidebands that would eliminate the disease organisms. Because Philip Hoyland used the high frequency sideband method to hide the true frequencies, never revealing to Dr. Rife or anyone else how he hid them, people wrongly believed that these higher low audio frequencies were the true primary frequencies that would eliminate the diseases. People today still use these higher low audio frequencies wrongly believing that they are Dr. Rife's true frequencies. They do not understand that they have to be used with a 3.3 Megahertz harmonic carrier frequency to produce Dr Rife’s true frequencies. To learn the complete historical information about how this happened read the entire document on this site called "The Rife Machine Report". To learn about the full potential of this Beam Ray Clinical machine read "Dr. Rife and Philip Hoyland's 3.3 MHz sweep" page. The full potential of this instrument is just beginning to be understood.

When Philip Hoyland developed this new type of Beam Ray Clinical instrument he did not use Dr. Rife’s primary original M.O.R. frequencies that were used in the Rife Ray #3 or the Rife Ray #4. He used harmonic frequencies based on Dr. Rife’s primary M.O.R. frequencies. Philip Hoyland, while working in Dr. Rife’s lab on the Beam Ray Clinical instrument discovered that EVERY higher harmonic of Dr. Rife’s original frequencies could be used as an M.O.R. frequency. Dr. Rife said that he believed that many of his frequencies were sub-harmonics of a true higher frequency. But, he probably did not know that all his frequencies were sub-harmonics of higher frequencies.  

With the understanding and knowledge that every harmonic of Dr. Rife's frequencies could be used as an M.O.R. Philip Hoyland built the Beam Ray Clinical instruments and used these higher harmonic frequencies as the new primary frequencies in these machines. In the next three charts, shown below, you will see Dr. Rife’s primary frequencies and the many harmonic frequencies that can also be used also as primary frequencies. The first frequency listed under each organism is Dr. Rife’s primary frequency for that organism. The frequencies with the single asterisk* were used as the primary frequencies in the Aubrey Scoon Beam Ray Clinical instrument that used the 3.3 Megahertz fixed carrier frequency. The frequencies with the double asterisk** were used as the primary frequencies in the Original Beam Ray Clinical instrument which used a 3.8 megahertz fixed carrier frequency. Some of the same frequencies were used in both machines and those have both the single and double asterisks.

Because of the discoveries of Dr. Rife and Philip Hoyland's use of harmonic frequencies we know that every frequency shown in these three charts, up to the 20th harmonic, could be used as a primary frequency M.O.R. for these organisms. Those who have a frequency generator that can output these frequencies may want to use these frequencies. Please keep in mind that Philip Hoyland used the frequencies as high as the 20th harmonic, on some organisms, in his Beam Ray Clinical instruments. Therefore it is reasonable to assume that harmonics higher than this could be used. How high the harmonics can be used is not known. If you want a higher resolution copy of these three charts click on, Chart 1, Chart 2, Chart 3.

Because the sideband method that Philip Hoyland used in the Beam Ray instrument is somewhat difficult to understand, we have created some sideband charts below that will make it easier to understand. In the next chart, shown below, we will show how the Beam Ray Clinical M.O.P.A. instrument produced the BX cancer virus (carcinoma) primary frequency of 3,214,900 hertz. The original Beam Ray Clinical instrument not only had the capability to produce sidebands but it also could produce harmonic sidebands. The ability of this instrument to produce harmonic sidebands made it possible for Philip Hoyland to use a fixed carrier frequency of 3.30 Megahertz (3,300,000 Hertz) and modulate that carrier frequency with an audio frequency of 21,275 Hertz to produce the BX cancer virus primary frequency of 3,214,900 Hertz (Dr. Rife's primary BX frequency of 1,607,450 Hertz multiplied by 2). What happens in the Beam Ray instrument is the audio frequency of 21,275 Hertz creates many sideband frequencies exactly 21,275 Hertz apart. The 4th lower sideband frequency that is created from 21,275 Hertz is the BX cancer virus primary frequency of 3,214,900 Hertz. Using this method Philip Hoyland was able to use audio frequencies, to produce through sidebands, all of Dr. Rife's primary frequencies.

PLEASE NOTE: Every line except the 3.3 MHz Carrier frequency line, represents a sideband frequency. We did not put the frequency down for every sideband so that we could clearly show the sideband frequency that produced the correct frequency that would devitalize or render harmless the microorganism.

In the next chart, shown below, we will show how the Beam Ray Clinical M.O.P.A. instrument produced the BY cancer organism (sarcoma) primary frequency of 3,059,040 Hertz (Dr. Rife's Primary BY organism frequency of 1,529,520 Hertz multiplied by 2) by using an audio frequency of 20,080. The audio frequency of 20,080 Hertz creates many sideband frequencies exactly 20,080 hertz apart. The 12th lower sideband frequency that is created from 20,080 hertz is the BY cancer organism primary frequency of 3,059,040 Hertz.

In the next chart, shown below, we will show how the Beam Ray Clinical M.O.P.A. instrument produced the Streptothrix primary frequency of 3,260,650 Hertz (Dr. Rife's Primary Streptothrix frequency of 191,803 Hertz multiplied by 17) by using an audio frequency of 7,870 Hertz. The audio frequency of 7,870 Hertz creates many sideband frequencies exactly 7,870 Hertz apart. The 5th lower sideband frequency that is created from 7,870 Hertz is the Streptothrix primary frequency of 3,260,650 Hertz.

The next sideband chart, shown below, shows how the Beam Ray Clinical M.O.P.A. instrument produced the E. Coli primary frequency of 3,332,080 Hertz (Dr. Rife's Primary E. Coli frequency of 416,510 Hertz multiplied by 8) by using an audio frequency of 8,020 Hertz. The audio frequency of 8,020 Hertz creates many sideband frequencies exactly 8,020 Hertz apart. The 4th upper sideband frequency that is created from 8,020 Hertz is the E. Coli primary frequency of 3,332,080 Hertz.

In the final sideband chart, shown below, we will show how the Beam Ray Clinical M.O.P.A. instrument produced the Pneumonia primary frequency of 3,414,900 Hertz (Dr. Rife's Primary Pneumonia frequency of 426,862 Hertz multiplied by 8) by using an audio frequency of 7,660 Hertz. The audio frequency of 7,660 Hertz creates many sideband frequencies exactly 7,660 Hertz apart. The 15th upper sideband frequency that is created from 7,660 Hertz is the Streptothrix primary frequency of 3,414,900 Hertz.

We could have done all the charts for every one of Dr. Rife's organisms but the five that we have used show how the Beam Ray Clinical instrument worked. These charts and frequencies show exactly how Dr. Rife's Beam Ray Clinical instrument worked. None of the low audio frequencies used in any of Dr. Rife's real Rife Machines were for the treatment of disease. The low audio frequencies were used to create the high RF frequency sidebands and it was these high RF sideband frequencies which killed, devitalized or rendered harmless the microorganisms. The Beam Ray Clinical Rife instrument was capable of producing the frequencies for all of Dr. Rife's microorganisms, both known and un-known. To find out how this instrument could do this read "Dr. Rife and Phlip Hoyland's 3.3 MHz sweep" page.

Unless a frequency generator can output the full range of the Radio frequencies it cannot work on Dr. Rife's principles or methods. These frequencies which we have shown on this page can only be produced in two ways, either direct or through sidebands. There are only a few frequency generators on the market today that can output Dr. Rife's original frequencies, or the harmonics of Dr. Rife's original frequencies, which are shown on this page.

We do not know of any frequency generator on the market today that the manufacturers call "Rife Machines" that can output these frequencies. Make sure that any frequency generator that you look at purchasing can output Dr. Rife's high RF frequencies. If the manufacturers claim they can produce these RF frequencies using just low audio frequencies without a carrier frequency then you can know without any doubt that their machine cannot output Dr. Rife's original frequencies. Then if you do decide to purchase one of these low audio frequency instruments you will not be disappointed later. For frequency generators that can output Dr. Rife's original high RF frequencies, click here.

The final chart, shown below, contains even lower audio frequencies that people have incorrectly believed were Dr. Rife’s true frequencies. We will now give a short history about how this mistake happened. If you want the complete story read Chapter 12 of "The Rife Machine Report".

In the 1950's Dr. Rife, John Crane and John Marsh started a company called Life Labs. They started building the Beam Ray Clinical instrument again. In 1935 the FCC was created by Congress and they began to control the Radio airwaves starting in 1936. Because the FCC was a small agency it took several years to finally become the agency they are today. In the 1930's Philip Hoyland could use whatever carrier frequency he wanted to in the Beam Ray Clinical instrument. He did use two different carrier frequencies that we know of: 3.3 Megahertz and 3.8 Megahertz.

In the 1950's Life Labs had to apply to the FCC for a new carrier frequency. They were assigned 4.68 Megahertz as their new carrier frequency for the new 1950's Beam Ray Clinical Rife Machine they were building. The problem was the higher audio frequencies that were used with the original 3.3 Megahertz carrier frequency did not properly match the new 4.68 Megahertz carrier frequency. Because Dr. Rife, John Crane and John Marsh did not understand that the higher audio frequencies needed to be re-calculated to work with the new carrier frequency, the instrument didn’t work. For some unknown reason they decided to lower the higher audio frequencies by a factor of 10 times. They then changed the sinewave waveform of these lower audio frequencies to squarewave. The lowering of these frequencies made it so that the new lower audio frequencies would never work properly to create the sideband method developed by Philip Hoyland. By lowering the audio frequencies this made it so they were only using the squarewave audio frequency harmonics to treat the various organisms. This change made it so the high RF frequency sideband method was no longer used. Because of these mistakes people have been using these lower audio square wave frequencies for many years believing that they were Dr. Rife’s true frequencies. To learn the complete historical information about how this happened back in the 1950's read Chapter 12 of “The Rife Machine Report”.   

Until the 1950’s all of Dr. Rife’s machine frequencies were based on his “Original High Frequencies” shown in the first chart on this page. Even though Philip Hoyland based his higher harmonic frequencies on the use of a fixed carrier frequency in combination with high audio frequencies to create sidebands, the machines still worked on Dr. Rife’s principle of coordinative resonance. The low squarewave audio frequencies have never achieved the results that were attained in the 1934 clinic and do not work on the principle of coordinative resonance that Dr. Rife used with his high RF frequencies.

If you want to use Dr. Rife's original high RF frequencies then you will need to use a frequency generator that will output his frequencies from 139,200 Hertz to 1,607,450 Hertz. If you want to use the higher harmonic frequencies that Philip Hoyland used in the Beam Ray Clincial instruments then you will have to purchase a frequency generator with a higher frequency range. To see a few generators on the market that have the ability to output these frequencies click here.