Royal Rife Instruments

"A History of Rife's Instruments and Frequencies"

"Introduction to the Rife Report"

The information contained in this report came about because there were so many varying views on how Dr. Rife’s instruments worked. The effort to find out how Dr. Rife’s instruments worked began back in 2001. It started with the rebuilding of the 1950’s AZ-58 Rife ray tube machine which was used by Dr. Rife and his two business partners, John Crane and John Marsh. The only way to truly find out how Dr. Rife’s instruments really worked was to rebuild from schematics his instruments or analyze original equipment if it could be found. Over the past 10 years we were able to find almost all the original equipment and test it using oscilloscopes and spectrum analyzers. The information in this report is based on hard evidence, not speculation. Once you have an original piece of equipment and can analyze it using the proper electronic test equipment then the mystery of how it worked ends.

For those who want to know how Dr. Rife’s instruments worked you can now read this report and see the original equipment and learn how it worked. Most people will realize, after reading this report, that any instrument that is called “A Rife Machine” which is for sale on the market today does not work on Dr. Rife’s methods, principles or frequencies. Dr. Rife’s instruments used frequencies a lot higher than the frequencies used in the so called “Rife Machines” sold today. This is a bold statement but the evidence in this report shows that this is an accurate statement.

If someone calls their instrument a “Rife Machine” you can be certain that it is not one. This report shows that Dr. Rife used high RF or radio frequencies to obtain a true coordinative resonance. Dr. Rife’s work also shows that RF is necessary to devitalize or eliminate the harmful microorganisms he worked with in his laboratory. Almost all the instruments sold today which are called “Rife Machines” use low audio frequencies. These low audio frequencies are not the correct frequencies that Dr. Rife found for the various microorganisms he worked on. People would be better off purchasing a frequency generator with a frequency range from at least 20 hertz to 2,000,000 hertz and use it rather than the so called “Rife Machines” sold today which are limited to about 30,000 hertz. These higher range frequency generators are called electronic test equipment, not “Rife Machines.”

In this report we will examine the way Dr. Rife’s instruments were built by examining three original Rife Machines that have been found. We will look at the evidence by quoting the sources such as Dr. Rife, John Crane, John Marsh, Dr. Couche, Dr. Lara, Dr. Stafford and Bertrand L. Comparet (Dr. Rife’s attorney in the 1939 Beam Rays Corporation trial, and later John Crane’s attorney for Life Labs’ trial in 1961). Hopefully anyone who reads this article will have a better understanding about Dr. Rife and the methods he used. Our goal is to try to give people information so that they will know how Dr. Rife’s equipment worked so that they will not be fooled by all the misinformation that has been published on this subject. We have tried to explained everything in layman’s terms. The report is divided into 17 chapters for easy reading. After reading this report it will be easier to make a decision on the best frequency generator to purchase.

Many people are confused about all the instruments that are on the market which are called "Rife Machines." They often ask us who sells the best frequency generator on the market that will output all of Dr. Rife’s frequencies? This is a hard question to answer. Instead of answering this question we have listed the many frequency generators that are available on the market today according to their ability to output Dr. Rife's high RF frequencies. Since Dr. Rife's instruments output frequencies from 139,200 hertz to 1,604,000 for the organisms he was working on then this should make it easier to make the correct decision.

(Click here for the Frequency Generator List)